The internal gears of the planetary reducer adopt carburized, hardened and ground gears. They have the features of small size, light weight, high load capacity, long service life, stable operation, low noise, large output torque, large speed ratio and high power. Meanwhile it achieve power splitting and multi-tooth meshing function. It is a new type reducer with wide versatility. The large input power can reach 104kW. It is suitable for industrial sections such as lifting and transportation, construction machinery, metallurgy, mining, petrochemical, construction machinery, light industry and textile, medical equipment, instrumentation, cars, ships, weapons and aerospace etc.
Cautions for operating planetary reducer equipment :
1. NO Hammering
The output shaft of the reducer adopts the direct hammering and it can’t stand axial hammering. The screw hole should be screwed into the shaft end to pressed into the joint.
2. Must have equipment vent cap
The blockage at the high position should be replaced with an exhaust plug before operation to ensure that the gas in the body is discharged when the reducer is working. If it is not replaced in time, the gas in the reducer will swell the oil seal and cause oil leakage after long operating time of the reducers.
3. Replace lubricating oil in time
Be careful that it must change the oil in time. In addition, check every half a month to the operating condition with harsh operating environment, high temperature and heavy dust. If there is dirt, change the lubricant immediately to maintain the cleaning of the lubricant and extend the service life of the machine.